V-8 VAPORiZER PARTS


Vapor Motor Parts List...-

Because we know we don't have enough time, parts and resources at the moment to build and sell a vapor motor setup to every person on the planet that want's one, we have decided to help you through the building process by sharing parts numbers and specs for the G.E.N. 7 Vapor Motor ... We'll give you the parts numbers we have found to date along with where to order them from... Now you may find the parts for less, and with hopes that your willing to contribute and share where you found the parts along with the parts numbers to this open source build, we think with other minds involved, it could go even further in design. You can e mail us at vaporengines@gmail.com , and we will post where you found the parts along with the parts numbers.. Even as far as to say, if you found ways to improve our design, maybe you my friend, could share some knowledge for this website also... We do appreciate any of your time involved in the effort... And everyone who's interested in this, will thank you for the contribution also...

VAPOR MOTOR OPEN SOURCE PARTS #s Google the numbers below...

- PSA9345 - STP Premium Air Filter... Fits Snugly over a 3 - 1/2 inch O.D. pipe... 23$ - Spectre 9849 - Air Intake for throttle body. 103.49$ @ summit racing... There might be a place that doesn't charge shipping..?

- PCE138.1002 - 12OO CFM 4 BARREL 4150 BASE BiLLET THROTTLE BODY... A.T. Racing World. This one works good... 159.15$ You will have to thread in a few plugs. You will need a tap set... Also a 1/2 inch copper pipe end, to plug a vacum hole in the top of the throttle body... You can pound that in with a mallet... -

- CV75NL - 3/4 inch Brass check valve for the exterior remote gas float... Which has the potential to explode. This valve WiLL stop that potential... 21.99 $ @ True Value

- UPC 659647000265 - A 1 - 1/4 inch Brass check valve. This is used for the Secondary air intake on the Mixing Tube.. The seal works good... 24.98 $ @ Home Depot...

- WAL 41637 - 3 - 1/2 inch O.D. Mandrell Bent Metal 90 Degree Elbow... This is from OReilly Auto Parts... They want a wopping 33.25 $ for this...! But, it's one of the only two short ones i have found for a decent price yet.. The longer sweep takes up too much space in the engine bay....

 

 

 

W



V - 8 VAPOR MOTOR
by Savage Rhymes